Customization: | Available |
---|---|
Certification: | CE, ISO, RoHS, ISO9001 |
Technique: | Winding Filament Roving |
Still deciding? Get samples of US$ 5.00/kg
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Glass wire waterproof material is a new type of waterproof material made of glass fiber as the main raw material and through high temperature heated pressure after adding special chemicals.
Generally, the cable is laid underground in the wet area, and when the cable is damaged, the water will enter into the cable from the damaged point.For copper cables, water reduces signal strength because the capacitance changes; For optical cable, if the water is frozen in the cable, it will cause too much pressure on the optical element, which can greatly affect the transmission of light.General requirements for water-blocking yarn has higher tensile strength, longitudinal elongation, long-term heat stability, instantaneous thermal stability, expansion rate and height, lower surface resistance and volume resistance characteristics.
Water-blocking yarn can block water because of containing absorbent resin component, when the water into the cable, it can quickly put the water absorption, and through the expansion effect, blocking the water from the damaged point and cavity closed immediately, water cannot penetrate further. Water blocking type cable is essential for water-blocking cable material, absorbing water quickly, high expansion ratio, and the advantages of resistance to tension stress, can instead of the commonly used ribbon and ointment or water-blocking tape, especially for pipeline, directly buried cable and the cable in water can provide more full and lasting protection, it is one of the best materials cable internal longitudinal resistance of water.In recent years, with the slow growth production of China's fiber optic and cable , the growth rate of the water retardant yarn industry has also been slowing down.
1. Good air permeability: one of the characteristics of glass waterproof material is good air permeability, which is because glass waterproof material can achieve waterproof effect through air, at the same time, air permeability can also help accelerate the drying speed inside the building.
2. Good temperature resistance: glass wire waterproof material in high temperature and low temperature environment have good tolerance.
3. Corrosion resistance: glass wire waterproof material can effectively resist the influence of acid, alkali and other corrosive substances, and reduce its damage to the building structure.
4.Long life: glass wire waterproof material has a long life, can last for more than 10 years.
The role of glass wire waterproof mainly has the following aspects:
1.Prevent water penetration: glass wire waterproof material can prevent water penetration, so that the building structure is not subject to water erosion, so as to ensure the stability of the building.
2.Prevent corrosion: the glass wire waterproof material can effectively prevent the building structure from being affected by corrosive substances, and prolong the service life of the building.
3. Improve the quality of buildings: glass and wire waterproof materials have a very high role in the protection of buildings.
waterproof yarn widely used in the building roof, wall, basement and pool and other places. In addition, glass wire waterproof materials can also be used in factories, workshops, municipal roads and other waterproof projects.
Poperty | Unit | ZS-0.35 | ZS-0.5 | ZS-1.0 | ZS-2.0 | ZS-3.0 | ZS-3.5 | ZS-4.0 | ZS-4.5 | ZS-5.0 | ZS-6.0 | ZS-10.0 | ZS-15.0 | ZS-17.0 | ZS-20.0 | ZS-23.0 | ZS-25.0 | ZS-30.0 |
Density | Denier | 25714 | 18000 | 900 | 4500 | 3000 | 2571 | 2250 | 2000 | 1800 | 1500 | 900 | 600 | 529 | 450 | 391 | 360 | 300 |
Mass per length | m/kg | 350 | 500 | 1000 | 2000 | 3000 | 3500 | 4000 | 4500 | 5000 | 6000 | 10000 | 15000 | 17000 | 20000 | 230000 | 25000 | 30000 |
Tensile strength | N | ≥500 | ≥500 | ≥300 | ≥150 | ≥110 | ≥110 | ≥80 | ≥80 | ≥50 | ≥40 | ≥20 | 20 | 18 | 15 | 10 | 20 | 8 |
Elongation | % | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 |
Absorption Speed | mm/g/1min | ≥55 | ≥55 | ≥55 | ≥50 | ≥50 | ≥45 | ≥40 | ≥38 | ≥35 | ≥35 | ≥25 | ≥25 | ≥25 | ≥25 | ≥25 | ≥25 | ≥25 |
Absorption capacity | m1/g/5min | ≥65 | ≥65 | ≥60 | ≥60 | ≥55 | ≥50 | ≥46 | ≥45 | ≥45 | ≥40 | ≥35 | ≥30 | ≥30 | ≥30 | ≥30 | ≥30 | ≥30 |
Short term stability | m1/g/5min (150ºC 24min) | ≥65 | ≥65 | ≥60 | ≥60 | ≥55 | ≥50 | ≥46 | ≥45 | ≥45 | ≥40 | ≥35 | ≥30 | ≥30 | ≥30 | ≥30 | ≥30 | ≥30 |
Long term stability | m1/g/5min (230ºC 11min) | ≥65 | ≥65 | ≥60 | ≥60 | ≥55 | ≥50 | ≥46 | ≥45 | ≥45 | ≥40 | ≥35 | ≥30 | ≥30 | ≥30 | ≥30 | ≥30 | ≥30 |
Moisture content | % | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 |
1.What Kind of Company are We?
Shanghai Gengyun Industrial Co., Ltd., based on the development of technology forum OF telecom optical&electric cable equipment and materials(TOEM), is mainly engaged in investment, trade, and technical services in the field of telecom optical & electric cable.
We provide our customers with complete materials demand solutions, as well as overall solutions and customized services in factory design, equipment configuration, product development and raw material supply.
2.Is our product single?
We have quite a wide variety of products.
Our products contain raw materials for optical fiber & cable, telecommunication cable include PE, PVC, FRP, PBT, water blocking yarn, water blocking tape, optical fiber ink, optical fiber, steel plastic composite tape, aluminum plastic composite tape, aramid yarn, etc. and
equipment for cable manufacturing including high-speed fiber coloring and rewinding machine, fiber merging machine, fiber screening and rewinding machine, special fiber drawing machine, coating production line, high-speed cable forming production line. There are different models of products under each category, and customization is supported.
3.Are samples available?
For most raw materials and optical cables, we can provide samples, but you need to bear the shipping costs; for cable manufacturing equipment, we can provide factory test reports of various indicators
4.Why Choose Our Company?
Our company was established in 2008 and has 16 years of experience in the communications industry. We can provide professional optoelectronic cable solutions and support product customization. Our products and raw materials are 100% in line with industry standards. We have warehouses all over the country. Such as Shanghai, Jiangsu, Qingdao, Beijing and so on.