125º C Irradiation Cross-Linked Po Granules LSZH Polyolefin Sheath Compound

• Customization: Available
• CAS No.: 9002-88-4
• Formula: (Cnh2)N
• Model NO.: T-PO002
• Material: Polyolefin
• Usage: General Plastics, Engineering Plastics, Specialty Plastics, Cross-Linked Flame Retardant Wires and Cables
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Extrusion
• Color: White Black with Color Masterbatch If Needed
• Transport Package: Bag/Pallet
• Specification: 25kg/bag
• Origin: China

Product Description

125ºC Irradiation Cross-linkable,Low-smoke,Halogen-free And Flame  retardant  POE  compound
Colour: White,Black(With Color Masterbatch If You Need Other Colour)

High temperature resistive, irradiated cross-linkable, low smoke,halogen-free and flame retardant polyolefin compound,based on POE resin,  is produced and pelletized by special technology with adding special modifier,halogen-free flame retardant,anti-oxidant,cross-linked sensibilizer and other special additives.
 

Specification

 

Type				Product Name						Application
T-PO002				125ºC Irradiation cross-linkable, low-smoke,halogen-free and flame retardant POE compound						For cross-linked flame retardant wires and cables which operation temperature is at 125  ºC . Operating Temperature: -25~125ºC.

 

Technology Parameters

1)The compound can be processed with conventional extruders, and the screw with a mininum 20:1 L/D and a compression ratio of 1.2 is recommended.
2)The following temperature profile of extruder is recommended:

Zone			Zone 1			Zone 2	Zone 3		Zone 4		Head	Die
Temperature  ºC			130			155	165		170		165	175

3)The material temperature should not be too high, otherwise there may be porosity.
4)It is recommended to irradiation according to the thickness of 1mm and the irradiation dose of 13MRad. The
specific irradiation dose shall be subject to the requirement of thermal extension test.
*Note: Compound should be dried at 70~80ºC before use, which storage time has exceeded 2 months.
Packaging Storage And Transport
Packaging:25kg/bag,Aluminim foli and PE mambrane inside bag and Kraft outside bag.
Storage and transport :Avoiding in direct sunlight and weathering. The storage place should be in clean,cool,dry and ventilated conditions.
 

Characters

 

No.

Inspected properties

Unit

Standard requirement

Typical

1

Density

g/cm^3

1.40±0.02

1.407

2

Tensile Strength

MPa

≥10

13.5

3

Elongation at Break

%

≥ 150

240

4

Thermal Aging 150±2ºC×240 h

%

±25

+11

Tensile Strength rate of change

Elongation at Break rate of change

%

±25

- 10

5

Impact embrittlement temperature(-40ºC)

--

-40ºC

Pass

≤15/30

6

Oxygen index

%

≥28

29

7

Acidity of gases evolved(PH value)

/

≥4.3

6. 1

8

Conductivityof gases evolved

μs/mm

≤10

1. 1

9

Content of halogen

mg/g

≤5

0

10

Volume Resistivity at 20ºC

Ω .m

≥1.0 × 10^12

5 × 10^12

11

Toxicity Index

-

≤2.5

1

12

Dielectric strength

MV/m

≥20

25

13

Hardness

HA

/

96

14

Thermal Prolongation

ºC ×min

200×15

Elongation Under Load

%

≤175

75

Permanent Deformation

%

≤15

0

15

Smoke Density Flaming

/

≤100

69

Note: Typical values are representative values in actual tests for reference only.

FAQ

1.What Kind of Company Are We?
Shanghai Gengyun Industrial Co., Ltd., based on the development of technology forum OF telecom optical&electric cable equipment and materials(TOEM), is mainly engaged in investment, trade, and technical services in the field of telecom optical & electric cable.
We provide our customers with complete materials demand solutions, as well as overall solutions and customized services in factory design, equipment configuration, product development and raw material supply.

2.Why Choose Our Company?
Our company was established in 2008 and has 16 years of experience in the communications industry. We can provide professional optoelectronic cable solutions and support product customization. Our products and raw materials are 100% in line with industry standards. We have warehouses all over the country. Such as Shanghai, Jiangsu, Qingdao, Beijing and so on.

3.Are Samples Free?
For most raw materials,optical fiber and optical cables, we can provide free samples. For cable manufacturing equipment, we can provide factory test reports of various indicators.

4.Is the Product Variety Rich?
We have quite a wide variety of products.
Our products contain raw materials for optical fiber & cable, telecommunication cable include PE, PVC, FRP, PBT, water blocking yarn, water blocking tape, optical fiber ink, optical fiber, steel plastic composite tape, aluminum plastic composite tape, aramid yarn, etc. and
equipment for cable manufacturing including high-speed fiber coloring and rewinding machine, fiber merging machine, fiber screening and rewinding machine, special fiber drawing machine, coating production line, high-speed cable forming production line. There are different models of products under each category, and customization is supported.

What We Have In The Field Of Telecom Optical & Electric Cable :
1>Mature and Efficient Supply Chain System And Rich Industrial Resources
2>Complete Materials Demand Solutions For Cable Manufacturing And Technical Services
3>Overall Solutions And Customized Services In Factory Design, Equipment Configuration, Product Development And Rawmaterial Supply
*Quotation Varies According To Customer's Requirements And Quantity Of Products