Low-Smoke Halogen-Free Standard Wall Thickness Single Core Cable for Railway & Bus

• Customization: Available
• Application: Underground, Industrial, Telecommunication, Car
• Voltage: Low and Medium Voltage Cable
• Model NO.: T-PC030
• Current: AC Cable
• Insulation Material: PVC
• Sheath Material: LSZH
• Material Shape: Round Wire
• Wire Core Material: Steel
• Certification: ISO, CCC, CE
• Brand: OEM
• Transport Package: Carton/Wooden Case
• Specification: 0.6/1kv 1.8/3kv 3.6/6kv
• Trademark: NA
• Origin: China
• Production Capacity: 500000 Meter/Year

Product Description

LSZH Standard Wall Thickness Single Core Cable For Railway & Bus
Product standards
Q/CR814-2021 Wires and Cables for Railway & Bus
Scope of use
Suitable for power distribution systems, control systems, or other electrical devices and occasions with halogen-free, low smoke, and flame-retardant requirements for rail transit passenger cars, buses, and similar vehicles with a rated voltage of 3.6 kV and below.
Usage characteristics
1. The rated AC voltage of the cable is 0.6/1kv, 1.8/3kv, 3.6/6kv
2. The working temperature of the cable is -40 ºC~90 ºC. The continuous operating temperature shall not exceed 90 ºC, and the maximum short-circuit temperature shall be 200 ºC for 5 seconds. In the event of a fire, such cables have excellent performance in preventing the spread of flames, smoke, and toxic gases.
3. Safety: This unit's product can limit the spread of flames, reduce the emission of toxic gases and smoke, minimize visibility loss, and enable rapid evacuation of personnel.
4. Allowable bending radius of cable: When the outer diameter of the cable is ≤ 20mm, the minimum allowable bending radius is 4 times the outer diameter of the cable. When the outer diameter of the cable is>20mm, the minimum allowable bending radius is 6 times the outer diameter of the cable.
5. The cable meets the requirements of low smoke and halogen-free performance. The gas release test during cable combustion meets the requirements of halogen gas total<5mg/g, pH value ≥ 4.3, conductivity ≤ 10us/mm, and light transmittance ≥ 70%.
6. Toxicity index: Equivalent to using European standard toxicity index not exceeding 3, equivalent to using iron standard toxicity index not exceeding 5
7. Cables can be used in situations contaminated with mineral oil and fuel oil.
8. The cable has the characteristic of withstanding vertical burning of a single cable.
9. Solvent resistance and acid alkali resistance.
10. Cables can be produced in various colors according to customer requirements.
 

Model	Rated Voltage	Core No.	Temperature resistance level	Section mm²	Remarks
T-PC027	0.6/1KV	1	90 ºC	1.00240	Insulation resistant to mineral oil and fuel oil
T-PC028	1.8/3KV	1	90 ºC	1.50240	Insulation resistant to mineral oil and fuel oil
T-PC029		1	90 ºC	1.50240	Standard wall thickness sheath;Insulation and sheath resistant to mineral oil and fuel oil
T-PC030	3.6/6KV	1	90 ºC	2.50240	Standard wall thickness sheath;Insulation and sheath resistant to mineral oil and fuel oil

Structure Size
Table 1- Single core cable without sheath   T-PC027 - 0.6/1KV - Insulation resistant to mineral oil and fuel oil

Nominal cross-section	Conductor diameter d(a)	Average insulation thickness	Outer Diameter		20ºC Conductor resistance	20ºC Insulated cathode	90ºC insulation resistance	Weight
		min	min	max	max	min	min
	min
mm²	mm	mm	mm	mm	Ω/km	MΩ.km	MΩ.km	kg/km
1.0	1.25	0.8	2.8	3.2	20	65	0.65	18
1.5	1.5	0.8	3.0	3.5	13.7	55	0.55	24
2.5	1.95	0.8	3.4	3.9	8.21	50	0.5	33
4.0	2.5	0.8	3.9	4.6	5.09	40	0.4	51
6.0	3.0	0.9	4.6	5.4	3.39	35	0.35	74
10	3.9	1.1	5.8	6.8	1.95	30	0.3	122
16	5.0	1.1	7.2	8.5	1.24	30	0.3	182
25	6.4	1.3	8.6	10.0	0.795	30	0.3	278
35	7.7	1.3	10.2	11.5	0.565	25	0.25	375
50	9.2	1.5	11.6	13.5	0.393	25	0.25	533
70	11.0	1.5	13.3	15.5	0.277	20	0.2	737
95	12.5	1.6	14.9	17.4	0.210	20	0.2	966
120	14.2	1.6	16.5	19.3	0.164	20	0.2	1213
150	15.8	1.9	18.5	21.7	0.132	15	0.15	1514
185	17.5	1.9	20.1	23.6	0.108	15	0.15	1815
240	20.1	2.1	22.9	26.8	0.0817	15	0.15	2418
a. just as reference

Table 2- Single core cable without sheath   T-PC028-1.8/3KV - Insulation resistant to mineral oil and fuel oil

Nominal cross-section	Conductor diameter d(a)	Average insulation thickness	Outer Diameter		20ºC Conductor resistance	20ºC Insulated cathode	90ºC insulation resistance	Weight
		min	min	max	max	min	min
	min
mm²	mm	mm	mm	mm	Ω/km	MΩ.km	MΩ.km	kg/km
1.5	1.5	2.5	6.2	7.3	13.7	120	1.20	68
2.5	1.95	2.5	6.6	7.8	8.21	100	1.00	81
4.0	2.5	2.5	7.1	8.4	5.09	90	0.90	106
6.0	3.0	2.5	7.6	8.9	3.39	80	0.80	133
10	3.9	2.5	8.4	9.9	1.95	65	0.65	183
16	5.0	2.5	9.5	11.1	1.24	55	0.55	252
25	6.4	2.5	10.8	12.7	0.795	45	0.45	349
35	7.7	2.5	12.0	14.1	0.565	40	0.40	455
50	9.2	2.5	13.4	15.7	0.393	35	0.35	610
70	11.0	2.5	15.1	17.7	0.277	30	0.30	826
95	12.5	2.7	16.9	19.8	0.210	30	0.30	1074
120	14.2	2.7	18.5	21.7	0.164	25	0.25	1332
150	15.8	2.7	20.0	23.4	0.132	20	0.20	1612
185	17.5	2.7	21.6	25.3	0.108	20	0.20	1921
240	20.1	2.7	24.1	28.2	0.0817	20	0.20	2498
1.5	1.5	2.5	6.2	7.3	13.7	120	1.20	68
2.5	1.95	2.5	6.6	7.8	8.21	100	1.00	81
a. just as reference

Table 3- Single core cable with sheath   T-PC029-1.8/3KV - Insulation and sheath resistant to mineral oil and fuel oil

Nominal cross-section	Conductor diameter d(a)	Average insulation thickness	Average thickness of sheath	Outer Diameter		20ºC Conductor resistance	20ºC Insulated cathode	90ºC insulation resistance	Weight
		min	min	min	max	max	min	min
	min
mm²	mm	mm	mm	mm	mm	Ω/km	MΩ.km	MΩ.km	kg/km
1.5	1.5	1.3	1.4	6.7	7.8	13.7	960	9.6	77
2.5	1.95	1.3	1.4	7.1	8.3	8.21	850	8.5	91
4.0	2.5	1.3	1.4	7.6	8.9	5.09	750	7.5	117
6.0	3.0	1.3	1.4	8.1	9.5	3.39	670	6.7	145
10	3.9	2.2	1.4	10.6	12.4	1.95	550	5.5	246
16	5.0	2.2	1.4	11.7	13.6	1.24	450	4.5	322
25	6.4	2.2	1.4	13.0	15.2	0.795	390	3.9	427
35	7.7	2.2	1.4	14.2	16.6	0.565	350	3.5	541
50	9.2	2.2	1.4	15.6	18.3	0.393	300	3.0	706
70	11.0	2.2	1.5	17.5	20.5	0.277	260	2.6	946
95	125	2.4	1.6	19.6	22.3	0.210	250	2.5	1216
120	14.2	2.4	1.6	21.1	24.6	0.164	220	2.2	1486
150	15.8	2.4	1.7	22.7	26.6	0.132	210	2.1	1792
185	17.5	2.4	1.7	24.0	28.1	0.108	200	2.0	2113
240	20.1	2.4	1.8	27.0	31.6	0.0817	180	1.8	2728
1.5	1.5	1.3	1.4	6.7	7.8	13.7	960	9.6	77
2.5	1.95	1.3	1.4	7.1	8.3	8.21	850	8.5	91
a. just as reference

Table 4- Single core cable with sheath   T-PC030-1.8/3KV - Insulation and sheath resistant to mineral oil and fuel oil

Nominal cross-section	Conductor diameter d(a)	Average insulation thickness	Average thickness of sheath	Outer Diameter		20ºC Conductor resistance	20ºC Insulated cathode	90ºC insulation resistance	Weight
		min	min	min	max	max	min	min
	min
mm²	mm	mm	mm	mm	mm	Ω/km	MΩ.km	MΩ.km	kg/km
2.5	1.95	3.0	1.4	10.5	12.3	8.21	1300	13.0	174
4.0	2.5	3.0	1.4	11.0	12.9	5.09	1150	11.5	207
6.0	3.0	3.0	1.4	11.5	13.4	3.39	1050	10.5	241
10	3.9	3.0	1.4	12.3	14.4	1.95	850	8.5	302
16	5.0	3.0	1.4	13.3	15.6	1.24	710	7.1	383
25	6.4	3.0	1.4	14.7	17.2	0.795	630	6.3	494
35	7.7	3.0	1.4	15.9	18.6	0.565	550	5.5	614
50	9.2	3.0	1.5	17.5	20.5	0.393	500	5.0	796
70	11.0	3.0	1.5	19.2	22.4	0.277	430	4.3	1037
95	12.5	3.0	1.6	20.8	24.3	0.210	400	4.0	1293
120	14.2	3.1	1.7	22.7	26.6	0.164	360	3.6	1595
150	15.8	3.1	1.7	24.2	28.4	0.132	340	3.4	1895
185	17.5	3.2	1.8	26.2	30.7	0.108	330	3.3	2252
240	20.1	3.4	1.9	29.2	34.2	0.0817	30	3.0	2915
a. just as reference

Packaging:
Export Standard 




What We Have In The Field Of Telecom Optical & Electric Cable :
1>Mature and Efficient Supply Chain System And Rich Industrial Resources
2>Complete Materials Demand Solutions For Cable Manufacturing And Technical Services
3>Overall Solutions And Customized Services In Factory Design, Equipment Configuration, Product Development And Rawmaterial Supply
*Quotation Varies According To Customer's Requirements And Quantity Of Product