T-PO012 Series Green Environmental Irradiation Crosslinking Low Smoke Halogen-Free Flame Retardant Polyolefin Oil Resistance Cable Material Products For Marine
It is suitable for Marine Cables, With Excellent Oil Resistance And Compliance With Iec-60092 Standards.
| Typical Physical And Mechanical Properties Are As Follows: |
| Item |
|
Unit |
Test Method |
Typical |
| Density |
|
g/cm3 |
GB/T 1033-2008 |
1.46 |
| Tensile Strength |
|
Mpa |
GB/T 1040-2006 |
13.2 |
| Elongation At Break |
|
% |
GB/T 1040-2006 |
185 |
| Air Thermal Aging Performance |
|
ºC×day |
GB/T 2951.7 |
100×7 |
| Maximum Change Rate Of Tensile Strength |
|
% |
GB/T 2951.7 |
-11 |
| Maximum Change Rate Of Elongation At Break |
|
% |
GB/T 2951.7 |
-6 |
| Smoke Density |
Without Flames |
… |
GB/T8323-2008 |
175 |
| With Flames |
… |
59 |
| Oxygen Index |
|
% |
GB/T 2406-2009 |
34 |
| Low Temperature Impact Embrittlement Temperature (-20 ºC) |
|
Failure Count |
GB/T 5470-2008 |
Pass |
| Thermal Deformation (90 ºC, 4h) |
|
% |
GB/T 8815 |
8 |
| Dielectric Strength |
|
MV/m |
GB/T 1408.1 |
29 |
| 20 ºC Volume Resistivity |
|
Ω·m |
GB/T 1410-2006 |
1.9×1010 |
| PH Value |
|
|
IEC60754-2 |
5.9 |
| Conductivity |
|
μs/cm |
IEC60754-2 |
2 |
| Halogen Gas Content |
|
mg/g |
IEC60754-2 |
1.2 |
| Toxicity Index |
|
… |
NES 713 |
1.4 |
*Appearance: Uniform color and no impurities. Evaluation: Qualified, meeting the requirements specified by ROHS.
Note: The above typical values are random sampling data. |
The material must be supplied packaged in such a way as to be protected during transport, handling and storage. The packaging must be in plastic bags, "bigbag", or cardboard box. The packaging must have adequate strength and be free of impurities that may contaminate the product and be protected against moisture as well.
1.What Kind of Company are We?
Shanghai Gengyun Industrial Co., Ltd., based on the development of technology forum OF telecom optical&electric cable equipment and materials(TOEM), is mainly engaged in investment, trade, and technical services in the field of telecom optical & electric cable.
We provide our customers with complete materials demand solutions, as well as overall solutions and customized services in factory design, equipment configuration, product development and raw material supply.
2.Is our product single?
We have quite a wide variety of products.
Our products contain raw materials for optical fiber & cable, telecommunication cable include PE, PVC, FRP, PBT, water blocking yarn, water blocking tape, optical fiber ink, optical fiber, steel plastic composite tape, aluminum plastic composite tape, aramid yarn, etc. and
equipment for cable manufacturing including high-speed fiber coloring and rewinding machine, fiber merging machine, fiber screening and rewinding machine, special fiber drawing machine, coating production line, high-speed cable forming production line. There are different models of products under each category, and customization is supported.
3.Are samples available?
For most raw materials and optical cables, we can provide samples, but you need to bear the shipping costs; for cable manufacturing equipment, we can provide factory test reports of various indicators
4.Why Choose Our Company?
Our company was established in 2008 and has 16 years of experience in the communications industry. We can provide professional optoelectronic cable solutions and support product customization. Our products and raw materials are 100% in line with industry standards. We have warehouses all over the country. Such as Shanghai, Jiangsu, Qingdao, Beijing and so on.
What We Have In The Field Of Telecom Optical & Electric Cable :
1>Mature and Efficient Supply Chain System And Rich Industrial Resources
2>Complete Materials Demand Solutions For Cable Manufacturing And Technical Services
3>Overall Solutions And Customized Services In Factory Design, Equipment Configuration, Product Development And Rawmaterial Supply
*Quotation Varies According To Customer's Requirements And Quantity Of Products
The material must be supplied packaged in such a way as to be protected during transport, handling and storage. The packaging must be in plastic bags, "bigbag", or cardboard box. The packaging must have adequate strength and be free of impurities that may contaminate the product and be protected against moisture as well.
){kind=link}