CAS No.: | 9002-88-4 |
---|---|
Formula: | (Cnh2)N |
Material: | Polyolefin |
Usage: | General Plastics, Engineering Plastics, Specialty Plastics, for Marine |
Plastic Properties After Heated: | Thermoplastic Plastics |
Plastic Forming Method: | Extrusion |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Typical Physical And Mechanical Properties Are As Follows: | ||||||||||||||||||||||||||||
Item | Unit | Test Method | Typical | |||||||||||||||||||||||||
Density | g/cm3 | GB/T 1033-2008 | 1.46 | |||||||||||||||||||||||||
Tensile Strength | Mpa | GB/T 1040-2006 | 13.2 | |||||||||||||||||||||||||
Elongation At Break | % | GB/T 1040-2006 | 185 | |||||||||||||||||||||||||
Air Thermal Aging Performance | ºC×day | GB/T 2951.7 | 100×7 | |||||||||||||||||||||||||
Maximum Change Rate Of Tensile Strength | % | GB/T 2951.7 | -11 | |||||||||||||||||||||||||
Maximum Change Rate Of Elongation At Break | % | GB/T 2951.7 | -6 | |||||||||||||||||||||||||
Smoke Density | Without Flames | … | GB/T8323-2008 | 175 | ||||||||||||||||||||||||
With Flames | … | 59 | ||||||||||||||||||||||||||
Oxygen Index | % | GB/T 2406-2009 | 34 | |||||||||||||||||||||||||
Low Temperature Impact Embrittlement Temperature (-20 ºC) | Failure Count | GB/T 5470-2008 | Pass | |||||||||||||||||||||||||
Thermal Deformation (90 ºC, 4h) | % | GB/T 8815 | 8 | |||||||||||||||||||||||||
Dielectric Strength | MV/m | GB/T 1408.1 | 29 | |||||||||||||||||||||||||
20 ºC Volume Resistivity | Ω·m | GB/T 1410-2006 | 1.9×1010 | |||||||||||||||||||||||||
PH Value | IEC60754-2 | 5.9 | ||||||||||||||||||||||||||
Conductivity | μs/cm | IEC60754-2 | 2 | |||||||||||||||||||||||||
Halogen Gas Content | mg/g | IEC60754-2 | 1.2 | |||||||||||||||||||||||||
Toxicity Index | … | NES 713 | 1.4 | |||||||||||||||||||||||||
*Appearance: Uniform color and no impurities. Evaluation: Qualified, meeting the requirements specified by ROHS. Note: The above typical values are random sampling data. |
Suppliers with verified business licenses