Virgin Recycled Irradiation Cross-Linked Polyolefin Compound Po/Poe/PE/PVC Material Granules for Cable Sheath

• CAS No.: 9002-88-4
• Formula: (Cnh2)N
• Material: Polyolefin
• Usage: General Plastics, Engineering Plastics, Specialty Plastics, Cross-Linked Flame Retardant Wires and Cables
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Extrusion
• Model NO.: T-PO002
• Color: White Black with Color Masterbatch If Needed
• Transport Package: Bag/Pallet
• Specification: 25kg/bag
• Origin: China

Product Description

125ºC Irradiation Cross-linkable,Low-smoke,Halogen-free And Flame  retardant  POE  compound
Colour: White,Black(With Color Masterbatch If You Need Other Colour)
Product Description
High temperature resistive, irradiated cross-linkable, low smoke,halogen-free and flame retardant polyolefin compound,based on POE resin,  is produced and pelletized by special technology with adding special modifier,halogen-free flame retardant,anti-oxidant,cross-linked sensibilizer and other special additives.
Type And Application

Type				Product Name						Application
T-PO002				125ºC Irradiation cross-linkable, low-smoke,halogen-free and flame retardant POE compound						For cross-linked flame retardant wires and cables which operation temperature is at 125  ºC . Operating Temperature: -25~125ºC.

Processing Technology
1)The compound can be processed with conventional extruders, and the screw with a mininum 20:1 L/D and a compression ratio of 1.2 is recommended.
2)The following temperature profile of extruder is recommended:

Zone			Zone 1			Zone 2	Zone 3		Zone 4		Head	Die
Temperature  ºC			130			155	165		170		165	175

3)The material temperature should not be too high, otherwise there may be porosity.
4)It is recommended to irradiation according to the thickness of 1mm and the irradiation dose of 13MRad. The
specific irradiation dose shall be subject to the requirement of thermal extension test.
*Note: Compound should be dried at 70~80ºC before use, which storage time has exceeded 2 months.
Packaging Storage And Transport
Packaging:25kg/bag,Aluminim foli and PE mambrane inside bag and Kraft outside bag.
Storage and transport :Avoiding in direct sunlight and weathering. The storage place should be in clean,cool,dry and ventilated conditions.
Properties

No.

Inspected properties

Unit

Standard requirement

Typical

1

Density

g/cm^3

1.40±0.02

1.407

2

Tensile Strength

MPa

≥10

13.5

3

Elongation at Break

%

≥ 150

240

4

Thermal Aging 150±2ºC×240 h

%

±25

+11

Tensile Strength rate of change

Elongation at Break rate of change

%

±25

- 10

5

Impact embrittlement temperature(-40ºC)

--

-40ºC

Pass

≤15/30

6

Oxygen index

%

≥28

29

7

Acidity of gases evolved(PH value)

/

≥4.3

6. 1

8

Conductivityof gases evolved

μs/mm

≤10

1. 1

9

Content of halogen

mg/g

≤5

0

10

Volume Resistivity at 20ºC

Ω .m

≥1.0 × 1012

5 × 1012

11

Toxicity Index

-

≤2.5

1

12

Dielectric strength

MV/m

≥20

25

13

Hardness

HA

/

96

14

Thermal Prolongation

ºC ×min

200×15

Elongation Under Load

%

≤175

75

Permanent Deformation

%

≤15

0

15

Smoke Density Flaming

/

≤100

69

Note: Typical values are representative values in actual tests for reference only.

What We Have In The Field Of Telecom Optical & Electric Cable :
1>Mature and Efficient Supply Chain System And Rich Industrial Resources
2>Complete Materials Demand Solutions For Cable Manufacturing And Technical Services
3>Overall Solutions And Customized Services In Factory Design, Equipment Configuration, Product Development And Rawmaterial Supply
*Quotation Varies According To Customer's Requirements And Quantity Of Products